| BRAND | AEG |
| Product | 24SPRE50 |
| Description | Thyristor controlled industrial rectifier & battery charger |
| Internal code | ONR3424585 |
| Weight | 160 |
| Technical specification | DC UPS Protect RCS 24V / 50A System configuration System setup Single Operation Battery configuration Individual battery The Protect RCS DC UPS System is a microprocessor based thyristor controlled rectifier. It provides high quality DC power for electronic equipment loads. Mechanical specification Enclosure free standing metal suitable for floor mounting type V2000 cabinet Metal sheet thickness Frame 2 mm Panels 1.5 mm Door 2 mm Protection class (according to IEC 60529) IP21 Painting RAL7035 Ventilation Air inlet in the front doors, front and back cabinet bottom, outlet through rear panel on the top Acoustic noise <66 dB(A) Cable entry from Bottom Dimensions: Height 1200 mm Width 600 mm Depth 800 mm Weight approx. 160 kg Electrical specification Rectifier type: 2 pulse (SCR) thyristor Nominal input voltage 230 VAC Input voltage tolerance ±10% Exceptional variation of the mains input voltage +15%, 20% Number of phases 1 Input frequency 50 Hz Input frequency tolerance ±6% Max. input current (10% mains, in high rate charge and Inom on the output) 13 A AC Rectifier input current total harmonic distortion (THDi) < 66% Input power at nominal voltage and float charge 0,64 Nominal DC output voltage 24V DC Nominal DC output current 50A DC Voltage regulation Static: ±1% • at float charge • 0 100% DC load variation • input mains voltage within the range ±10% • input frequency within the range ±6% • battery temperature within 0°C to 40°C Dynamic: With single LC filter with a battery connected (capacity >5 x nominal current of the rectifier • load variation 10% => 90% : 5% • load variation 90% => 10% : +8% Current regulation +2% at the maximum current level Ripple voltage: Ripple voltage with standard battery capacity of 3x nominal current: without batteries 2.5% RMS typically (max 5%) with batteries 1% RMS Heat losses at rated power 393 W Long term stability for 1000 hours (of output voltage) 0.15% Charger characteristic per IEC 47810: IU High voltage insulation between input/output and electrical earth 2500V AC (With disconnected electronic boards in the rectifier). Insulation resistance with disconnected electronic boards in the Rectifier >200MΩ Input to ground 500V DC Input to output 500V DC Output to ground 500V DC Protection: • Slow start function • Short circuits • Limited at 100% of rated current • Internal DC fuse • Nonvolatile storage of system parameters and user settings • Mains failure shutdown, Rectifier failure shutdown • High voltage DC shutdown • History function for time stamped alarm and system events Battery adjustments (If battery is included in scope of supply, it must appear as a separate line in the quote) Manufacturer Enersys Type HX Capacity 47 Ah Number of cells 0 Number of strings 1 Float charge voltage 0,00 V High rate voltage 0,00 V High rate charge time (range 0150h): 4 h High rate charge timer mode settings Post Commissioning voltage 0,00 V End of discharge voltage 0,00 V Measurements – Alarms Measurements available on LCD display: • AC input voltage • DC charger voltage • DC charger current • DC battery current • Battery capacity • DC load voltage • DC load current Alarm indications: • Mains voltage alarm • Charge fault alarm • Battery voltage alarm • DC voltage alarm • Ground fault +/alarm • Charger current limit alarm • Battery current limit alarm • High charger current alarm • High battery current alarm • high temperature alarm • Temperature sensor error alarm • Internal communication error alarm • Battery test alarm • High battery temperature alarm • Long charge time alarm • No power supply voltage alarm • Battery in operation alarm • Service alarms List of installed items • EMI filter (CE) • Voltage temperature compensation (cable length 30m) • Bridge temperature alarm • AC input protection: Switch • Battery protection: Fuse • Load protection: None • Ground fault (by With GCAU) • Cabinet colour: RAL7035 • Cabinet protection degree: IP21 |
Discover the superior quality and performance of the AEG 24SPRE50 with Onrion LLC in United States . Whether you are looking for reliability or efficiency, this product meets all your industrial needs.
The 24SPRE50 is designed to provide optimal performance and durability in various applications. Known for its high-quality construction and innovative features, it is a preferred choice for professionals.
Key Features of 24SPRE50 :
At Onrion LLC , we offer the 24SPRE50 at competitive prices and with the fastest delivery times across United States . Our expert team is ready to assist you with all your inquiries and provide tailored solutions to meet your specific needs.
Why Choose Onrion LLC ?
Get Your Quote Today! Ready to enhance your operations with the 24SPRE50 ? Contact us now for a personalized quote. Fill out the form below or send us an email with your inquiry. Let us help you make a cost-effective, quality-driven choice for your business.
Important Notice: While we supply AEG products, Onrion LLC is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
IMRA 96 Power supply card for H/T,029139671
Three-phase power meter (KWH METER) Analog type
Lamp, Signal
LS220K.22 (220-250V 50/60Hz/DC
Contactor AC 3-pin LS132K.22E44 / AC3-132kW/400V Coil 220-250V 50/60Hz / Screw
LS4K.10 (220-230V 50Hz, 277V 6 0Hz)
LS5K.10 (220-230V 50Hz, 277V 6 0Hz)
143235 LS7K.10 (220-230V 50HZ, 277V 60HZ)
KONTAKTGEVER MAGNA
Thyro-A
Thyro-A
THYRISTOR SWITCH
THYRISTOR
(18.5 kW / 34,7A / 2930 rev / min) Engine Type: A 160L / 2F-11S + E2 (aluminum housing) PSN: 519870 Dimension drawing: A17_21M_BL2 (8th line / second engine type) Speed 1: 2940 U / min Speed 2: 3550 U / min Power 1: 18.5 kW Power 2: 18.5 kW Voltage 1: 690/400 V Voltage 2: 460 V Frequency 1: 50 Hz 2 frequency: 60 Hz Stream 1: 19.5 / 33.7 A Stream 2: 29.0 A Design: IMB3 Weight: kg + packing 110 -> Energy efficiency class IE2 -> 3xPTC 160 ° C -> Iso class F. -> IP55 -> circuit S100 -> Operating mode S1 -> Paint RAL7011
relay
SH04.22 (24V DC)
Motor Protection Switch
HS9.11 auxiliary switch block (1s, 1NC) left
HS 10R.10 alarm switches (1 s
