Buy GABT20M from Transfluid in United States

" K " TYPE 140 °C

" K " TYPE 120 °C

"K " TYPE 198 °C

11 KR-D42 CLUTCH

11 KRG 48

Coupling comprising:  with internal wheel  coupling without taper sleeve, drilled with D = Ø48 mm G7 and Keyway to DIN 6885/1  with flexible coupling BT20, undrilled  melting plug T = 140 ° C  Viton seals WITHOUT oil filling

12CKRG

Fluid Coupling

ACG0798CA

Trans fluid turbo coupling Coupling comprising:  clutch drilled with D = Ø48 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT20, drilled and grooved, DIN 6885/1

12 KRG 48 XXX

Coupling: coupling, drilled with D = Ø48 mm G7 and Keyway according to DIN 6885/1 Angefl. Elastic coupling BT20, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø55 mm Viton seals-melting plug T = 140 ° C Weight 21,5 kg WITHOUT oil filling

13 KRG - INPUT D60 - OUTPUT ROUGH BORE

hydraulic coupling

13 KRG 60 XXX

Trans fluid turbo coupling With:  coupling with conical sleeve, drilled with D = Ø60 mm without key  Angefl. Elastic coupling BT30, drilled and grooved, DIN 6885/1 maximum bore diameter Ø70 mm specify when ordering  Viton seals  melting plug T = 140 ° C  weight about 34 kg WITHOUT oil filling

TFP1299JA

HYDRODYNAMIC JOINT

13CKRG

15KRG

15 KRG 60 65 RM

Trans fluid turbo coupling  driven side (transmission side) with conical sleeve, drilled with D = 60 mm, with a keyway according to DIN 6885/1  drive side (motor side) Angefl. Elastic coupling BT40, drilled with G = 65 mm H7 with a keyway according to DIN 6885/1  Viton seals  melting plug T = 140 ° C  weight about 50.3 kg WITHOUT oil filling

15 KRG 60 XXX

Trans fluid turbo coupling Type: 15 KRG 60 xxx Coupling comprising:  coupling with conical sleeve, drilled with D = Ø60 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT40, drilled and grooved, according to DIN 6885/1 maximum hole diameter Ø80 mm specify when ordering

15 KRG 65 XXX

Coupling: coupling with taper sleeve, bored with D = Ø65 mm without Keyway according to DIN 6885/1 Angefl. Elastic coupling BT40, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø80 mm Viton seals-melting plug T = 140 ° C Weight approx 50.3 kg WITHOUT oil filling

15KRD ?? 60

Transfluid Turbokupplung

17 KRG 60

Coupling comprising:  with internal wheel  coupling with conical sleeve, drilled with D = Ø60 mm and Keyway to DIN 6885/1  with flexible coupling BT50, undrilled Melting plug T = 140 ° C  Viton seals WITHOUT oil filling

17 KRG 75 XXX

Coupling with:  clutch, drilled with D = Ø75 mm G7 and Keyway according to DIN 6885/1  Angefl. Elastic coupling BT50, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø90 mm Viton seals   fusible plug T = 140 ° C  Weight approx 77 kg WITHOUT oil filling

19 KRG 55 55

Coupling comprising:  input clutch with the conical sleeve, drilled with D = Ø55 mm and keyway according to DIN 6885/1  leaving Flanged elastic coupling BT50, drilled with G = Ø55 mm and keyway according to DIN 6885/1  Viton seals  melting plug T = 140 ° C  weight about 84 kg WITHOUT oil filling

19 KRG XX XX

turboclutch

24 KRG 100

Transfluid Turbokupplung

27K MODEL

hydraulic coupling

TFP5558BLUE

Rubber Block

315 NBG

(Thrustor TF30 / 50 - NGO)